In shaftwall assemblies, J Runner for the shaftwall is used at the floor and ceiling. The top and bottom J-runners are friction-fit with studs and gypsum shaftliner panels. J-Runner had different sized flanges. Installed up against the shaft is the longer flange. The flange acts as a backstop to make it simple to place the liner panel.
All J-Runners are produced from hot-dipped galvanized steel in standard G40 coating. G60 is available upon special request.
In shaftwall assemblies, J Runner for the shaftwall is used at the floor and ceiling. The top and bottom J-runners are friction-fit with studs and gypsum shaftliner panels. J-Runner had different sized flanges. Installed up against the shaft is the longer flange. The flange acts as a backstop to make it simple to place the liner panel.
All J-Runners are produced from hot-dipped galvanized steel in standard G40 coating. G60 is available upon special request.
Used to build horizontal shaft walls, ceilings, services risers, air return shafts, stair shafts, elevator shafts, and mechanical shafts.
| Item | Size | Color | Edges | Cac | Nrc | Thickness | |
|---|---|---|---|---|---|---|---|
| JR1030-509R16 | 10x50x30mm | ||||||
| 400JR-23 | 25x102x50mm | ||||||
| 400JR-24 | 25x102x50mm | ||||||
| 400JR-32 | 25x102x50mm | ||||||
| 400JR-34 | 25x102x50mm | ||||||
| 400JR-48 | 25x102x50mm | ||||||
| 400JR-58 | 25x102x50mm | ||||||
| 600JR-23 | 25x152x50mm | ||||||
| 600JR-24 | 25x152x50mm | ||||||
| 600JR-32 | 25x152x50mm | ||||||
| 600JR-34 | 25x152x50mm | ||||||
| 600JR-48 | 25x152x50mm | ||||||
| 600JR-58 | 25x152x50mm | ||||||
| 212JR-23 | 25x63x50mm | ||||||
| 212JR-24 | 25x63x50mm | ||||||
| 212JR-32 | 25x63x50mm | ||||||
| 212JR-34 | 25x63x50mm | ||||||
| 212JR-48 | 25x63x50mm | ||||||
| 212JR-58 | 25x63x50mm | ||||||
| 212JS2-78 | 50x63x76mm |
P.O.BOX: Turkey Turkey - Simirna Endüstriyel Kimya San. ve Dış Tic. A.Ş. A.O.S.B, 10040. Sk. No:9, 35620 Atatürk Osb/Çiğli/İzmir
Your directions:
Change to walking, cycling, public transport or driving.
